| Model No.: FX-CU | Place of Origin: China |
U Roll Forming Machine is design for Dry wall Ceiling Product ,the machine working speed is about 20-25m per minute,whole line consist manual decoiler,main forming machine,control box,hydraulic pump and run out table, total power is 8kw.
|
Machine components |
Technical parameters |
|
Decoiler |
1.5T or 3T,manual or Electric powered. |
|
Main forming machine |
10tations forming rollers,gear drive.shaft diameter 50mm |
|
Hydraulic pump |
4kw |
|
Control box |
Delta PLC and frequency. |
|
Run out table |
Manual operate ,Height adjustable |
|
Tool box |
For operate tool and spare parts. |
Working flaw chart
Different design of machine photos
Middle plate structure
Column one
Detailed Images
Accessar for U Roll Forming Machine
Decoiler
Roller
Control box
Pump
Encoder
Table
The product after roll forming
Direction for use
1.Put all necessary parts on the right location,make the ground falttening.
2.Connect electric wires,use 6-8 mm² support line and keep grounding.
3.Fill hydraulic oil in the pump.not too full,three quarters are ok.
4.Feed raw materil into the machine slowly,make it run smoothly then automatic.
5.Pay attention to final sheet collection,do not scretch it or hurts people.
Description of application effect
1.The whole line working speed is about 20-25m/min.,max working speed could be 45-50meters per minute.
2.Feeding material width should be confirmed before machine design .the width are changeable,
3.Material thickness normal range are 0.3-0.8mm.if you have any special request on material thickness,we should discuss in advance .
4.we can design the machine based on buyer's profile drawing.
5.Final sheet embossing is available.we can different embossing rollers on various pattern and drawings.
Size and Weight Information
|
Name |
Decoiler |
Machine |
Pump |
Runout table |
|
Size |
1.3*1.4*1.57 |
4.0X0.8X1.5 |
660*550*900 |
3*0.6*0.75 |
|
Weight |
355KGS |
2000kgs |
50kgs |
50kgs |
Packing&Shipping
Normal standard is nude,easy damage parts are covered with plastic film or wooden frame.we can also pack the machine based on customer's special requests.
We fix the bottom of the container with triangular wood,the machine is fixed with steel wire to the container.
After Sales Service
All-round after-sales service
1. We can design operate language based on customer's mother tongue.
2. We provide 24 hours online service to solve any questions .
3. Our three experienced engineer are prepared for your local installation .
4. We provide for free sapre parts for you.
5. We can slod buy suitable testing material for customer's easy operation.
6. Customer can send their workers here study to to use and operate the machine.
